waterproof textiles and fibres is a special challenge. The fabrics must not lose their technical properties despite a protective coating. In addition, the waterproofing must also tolerate normal handling of the fabrics and not dissolve through use. This poses great hurdles for the development of a waterproofing for textile and fiber fabrics. NanoCare has succeeded in overcoming these hurdles and developing products that offer the right sealant for every type of fabric. Each of these products offers the same catalogue of outstanding benefits
for your convertible
NanoCare textile impregnation is the first choice to protect and maintain high quality fabric roofs for convertibles. With this fiber coating a fabric roof becomes permanently tight, dirt-repellent and retains its color. The textile impregnation is also very durable. A freshening up at the start of the season and before the winter break is completely sufficient. The convertible roof is thus permanently protected and retains its function and colour throughout the season.
Fancy a weatherproof waterproofing?
Get in touch
for home and garden
The NanoCare textile impregnation is also excellent for the protection of all fiber and textile materials in house and garden. With this protection and care product you can treat your pavilions, sunshades and folding chairs very well. They stay fresh longer and do not fade as quickly. After a rain your things are clean again and shine like new.
You want to be prepared for the sunny summer days?
Get in touch
for the interior
NanoCare also offers a whole range of waterproofing agentsn for indoor use. With these products you can provide your upholstery, sofas, armchairs and cushions with a protective cover. Spilled coffee or cola can thus no longer penetrate the fabric and soil it. The NanoCare products are also suitable for leather. So your leather sofas and leather seats in the car have an additional protection against dirt and for a long life.
The NanoCare textile sealant covers the fabrics with a waterproof film that protects it from any kind of wetness.
NanoCare fiber impregnation is pliable and flexible. It does not harden but retains its elastic state.
The NanoCare waterproofing agents create a micro-rough surface, like the one found on lotus flowers.
NanoCare textile impregnation completely envelops the fibres. They are thus permanently protected from dirt particles.
nanoCare works. The textiles to be protected are first thoroughly cleaned. Any dirt that is not removed is sealed by the textile impregnation. This makes cleaning unnecessarily difficult.
The NanoCare textile impregnation is applied with a sponge or with a sprayer. If possible, the impregnation solution can also be washed in. After drying and the specified exposure time, the fabrics are sustainably protected against penetrating oil or water.
The nano coating of the fibres also creates a micro-rough surface that keeps water and dirt out. This also gives textiles a self-cleaning surface. To clean them, you only need to wipe them with a damp cloth or rinse them with running water, for example a watering can.
However, please do not use steam or high-pressure cleaners. This would destroy the impregnation layer and make it ineffective. Trust in the advantages NanoCare offers you with its products. You will get a sustainable, durable and harmless protection for all types of fiber fabrics in your household.
Get in touch
| Specifications | |
| Chemical base: | Modified silica |
| Layer thickness: | approx. 100 – 150 nm |
| Water repellency: | between 130° and 150° (20µl) |
| oil repellency: | between 120° and 130° (20µl) |
| slip angle: | not applicable |
| Temperature stability: | 250°C permanent, 450°C peak |
| Chemical stability: | between pH 1 and pH 13 |
| Weathering resistance: | 3500h according to ISO 11507 A |
| Washing stability: | 10 – 40 washes LTD to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference. |
| Salt water resistant: | Yes |
| Transparency: | 100% |
| Storage stability: | 2 years |
| Temperature sensitivity: | 1°C to 30°C |
| Consumption: | 80 – 150 ml/m2 |
| Application: | the coating liquid is applied to the surface by standard pump spray systems. If the substrate cannot absorb the liquid immediately, the use of a paint roller is recommended to ensure uniform wetting. The coating is fully cured after 24 hours. |
A padding application is also possible. The wash stability can be increased with Nanoflex WX (crosslinker) in this process.
The finishing material must be free of anionic, surface-active residues. Silicones or tensides interfere with the effect and adhesion. We are happy to provide technical support with regard to pre-cleaning.
Nanoflex® Tex 2 is additionally available in the quality grades textile and Tex 4. These formulations contain a lower (textile) or higher (Tex 4) proportion of active components.
The product is water-based and not a hazardous material according to ADR and IATA. However, it can also be shipped as a liquid concentrate (Nanoflex® Konzentrat TP).
For handling of Nanoflex® Tex 2 please refer to the safety data sheet.
| Specifications | |
| Chemical Base: | Combination of modified silica and wax. |
| Coating thickness: | > 300 nm |
| Water repellency: | Between 130° and 150° (20μl) |
| Oil repellency: | no |
| Glide angle: | not applicable |
| Temperature stability: | 180°C |
| Chemical stability: | between pH 3 and pH 11 |
| Weathering resistance: | 500h according to ISO 11507 A |
| Washing stability: | low |
| Salt water resistant: | yes |
| Transparency: | 100% |
| Storage stability: | 1 year |
| Temperature sensitivity: | 1°C to 30°C |
| Consumption: | 30 – 50 ml/m2 |
| Application: | The coating liquid is applied to the surface by standard pump spray systems. If the substrate cannot absorb the liquid immediately, e.g. in the case of smooth leather, it is rubbed in with light polishing movements. The coating is fully cured after 24 hours. |
The finishing material must be free of anionic, surface-active residues. Silicones or tensides disturb effect and adhesion. We are happy to provide technical support with regard to pre-cleaning.
The product may change after a longer standing time (e.g. creaming, sedimentation, separation). Stir or shake thoroughly before use.
The system can be used in all Ökotex classes (APEO/formaldehyde-free). Nanoflex® L-Care is a ready-to-use mixture and is not available as a concentrate. The product is water-based and not a dangerous good according to ADR and IATA.
For handling Nanoflex® L-Care, please refer to the associated safety data sheet.
| Specifications | |
| Chemical base: | Fluorinated polymer |
| Coating thickness: | > 300 nm |
| Water repellency: | Between 130° and 150° (20μl) |
| Oil repellency: | between 120° and 130° (20μl) |
| Glide angle: | not applicable |
| Temperature stability: | 200°C |
| Chemical stability: | between pH 1 and pH 13 |
| Weathering resistance: | 500h according to ISO 11507 A |
| Washing stability: | 10 – 40 washes LTD according to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference. |
| Salt water resistant: | Yes |
| Transparency: | 100% |
| Storage stability: | 1 year |
| Temperature sensitivity: | 1°C to 30°C |
| Consumption: | 3 – 4% of the concentrate based on the dry textile weight or 6 – 8% based on the application amount of water. |
| Application: | The coating liquid is applied by a wash cycle in standard washing machines. The use of further washing agents is not necessary. Optimum performance is achieved from 4% based on the dry textile weight. The amount of water used in the washing machine must be known in advance if the dosage is based on the amount of water used. |
The product achieves effects after air drying, the maximum effect is only reached after heating (50°C) in the dryer.
The finishing material must be free of anionic, surface-active residues. Silicones or tensides interfere with effect and adhesion. We are happy to provide technical support with regard to pre-cleaning.
Nanoflex® Wash-on is only available as a concentrate. The product is water-based and not a hazardous material according to ADR and IATA.
For handling Nanoflex® Wash-on, please refer to the associated safety data sheet.
After the treatment of our parasol, the fabric looked like new. Now also nothing drips through and everything underneath stays dry.
Proin gravida nibh vel velit auctor aliquet. Aenean sollicitudin, lorem quis bibendum auctor, nişi elit consequat ipsum, nec sagittis sem nibh id elit. Duis sed odio sit amet nibh vulputate cursus a sit amet mauris. Morbi accumsan ipsum velit. Nam nec tellus a odio tincidunt auctor a ornare odio. Sed non mauris vitae erat consequat auctor eu in elit.
Class aptent taciti sociosgu ad litora torguent per conubia nostra.
Waterproofing our garden furniture was a task for our children. It is very reassuring that nothing can happen to them anymore due to the new mixture.
Wir waren auf der Suche nach einem innovativen Unternehmen, das moderne Lösungen in verschiedenen Geschäftsbereichen anbieten kann. Nano Care nahm sich die Zeit, um zu verstehen, wer wir als Unternehmen sind und in welchem Markt wir tätig sind. Bisher haben wir mit ihren Produkten für den Schutz von Gebäuden und Textilien, den Dura-Keramikbeschichtungen für Automobile und der revolutionären antimikrobiellen Beschichtung Liquid Guard gearbeitet. Das Feedback, das wir von unseren Kunden erhalten, ist mehr als zufriedenstellend. Wir empfehlen von ganzem Herzen die Zusammenarbeit mit Nano Care und die Implementierung ihrer Lösungen.
Grigor Mihov, CEO Nano Coat Bulgarien
The NanoCare impregnation for textiles was the last rescue for my convertible fabric roof from my old Escort. I can now enjoy the summer again and prepare my car for the restoration next winter.
The internet is full of questions like, “What is the best ceramic coating?” or “Are nano-ceramic coatings worth the money?”. Especially in forums about car refurbishment, there is a...
Learn more
This spray allows any type of bacteria to be killed on surfaces for a period of more than a year – even the “superbugs”! Every year we hear about...
Learn more
